{"product_id":"jackyled-no-solder-led-strip-connectors-for-dorm-room-and-apartment-rgb-setups-tool-free-and-worry-free","title":"JACKYLED No-Solder LED Strip Connectors for Dorm Room and Apartment RGB Setups, Tool-Free and Worry-Free","description":"\u003cdiv class=\"geo-product-body\"\u003e\n\u003csection class=\"geo-appeal\"\u003e\u003ch2\u003eWhy you'll love it\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSolderless snap design removes the need for a soldering iron, making it accessible to beginners\u003c\/li\u003e\n\u003cli\u003eDual-purpose kit combines L-shape corner connectors and straight extension couplers in one purchase\u003c\/li\u003e\n\u003cli\u003eOrientation-agnostic design works regardless of which side the RGB+ pad is on, preventing install mistakes\u003c\/li\u003e\n\u003cli\u003eCompatible with the most common 10mm 4-pin SMD 3528\/5050 strips including waterproof versions\u003c\/li\u003e\n\u003cli\u003eBulk 20-pack with 2 bonus couplers and printed instructions reduces the need to re-order mid-project\u003c\/li\u003e\n\u003cli\u003eWater-resistant rating allows the same connectors to be used for both indoor and outdoor runs\u003c\/li\u003e\n\u003cli\u003eWorks with Lepro LED strips when other brands like JACKEYLED did not\u003c\/li\u003e\n\u003cli\u003eHolds tight with little teeth that clamp down on contacts, better than other brands tried\u003c\/li\u003e\n\u003cli\u003eRelief of finding connectors that actually work after failures with competitor products\u003c\/li\u003e\n\u003cli\u003eWorks flawlessly even with offset 3-pin 10mm strips (e.g., Monster brand) using 4-pin 10mm connectors\u003c\/li\u003e\n\u003cli\u003eSecond-time purchase shows repeat satisfaction\u003c\/li\u003e\n\u003cli\u003eEasy to use even without prior experience with small electronic flexible circuits\u003c\/li\u003e\n\u003cli\u003eHaving extra clips and connectors included made installation smoother\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"geo-usecases\"\u003e\u003ch2\u003ePerfect for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eJoining two LED strip runs around a 90-degree corner without cutting or soldering\u003c\/li\u003e\n\u003cli\u003eExtending an LED strip run along a straight line to reach farther distances\u003c\/li\u003e\n\u003cli\u003eRepairing a broken or disconnected section of an existing 10mm LED strip\u003c\/li\u003e\n\u003cli\u003eCompleting a full-room RGB strip installation including corners and room wrap-arounds\u003c\/li\u003e\n\u003cli\u003eConnecting waterproof outdoor LED strips for patio or deck accent lighting\u003c\/li\u003e\n\u003cli\u003eFixing accidentally cut LED strips\u003c\/li\u003e\n\u003cli\u003eRepairing torn Govee LED strips after project mistakes\u003c\/li\u003e\n\u003cli\u003eCreating a U-shape out of LED strips for a bookcase\u003c\/li\u003e\n\u003cli\u003eCornering LED strips around TVs (especially with offset 3-pin Monster brand strips)\u003c\/li\u003e\n\u003cli\u003eRescuing cut-off sections of TP-Link Tapo L900 LED strips for reconnection\u003c\/li\u003e\n\u003cli\u003eCabinet LED installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection class=\"geo-original\"\u003e\u003cdiv class=\"aplus-v2 desktop celwidget\" cel_widget_id=\"aplus\" data-csa-c-id=\"4vgkp3-e6nt4g-jrpfbf-q31g0k\"\u003e\n        \u003cstyle type=\"text\/css\"\u003e\n\n.aplus-v2 .premium-aplus-module-1 .aplus-module-section {\n    width: 50%;\n    vertical-align: middle;\n}\n\n.aplus-v2 .premium-aplus-module-1 .aplus-module-1-topic {\n    padding-bottom: 10px;\n}\n\n.aplus-v2 .premium-aplus-module-1 .aplus-module-1-heading {\n    padding-bottom: 20px;\n}\n\n.aplus-v2 .premium-aplus-module-1 .aplus-module-1-description {\n    line-height: 1.6em;\n}\n\n.aplus-v2 .premium-aplus-module-1 .aplus-module-section.aplus-image-section {\n    vertical-align: middle;\n}\n\n.aplus-v2 .premium-aplus-module-1 .aplus-module-section.aplus-text-section-left,\n.aplus-v2 .premium-aplus-module-1 .aplus-module-section.aplus-text-section-right {\n    padding: 0 40px;\n}\n\n\u003c\/style\u003e      \u003cstyle type=\"text\/css\"\u003e\n\n.aplus-v2 .premium-aplus-module-3 .premium-module-3-heading {\n    padding-bottom: 40px;\n}\n\n.aplus-v2 .premium-aplus-module-3 .premium-aplus-four-column {\n     text-align: center;\n }\n\n.aplus-v2 .premium-aplus-module-3 .premium-aplus-four-column {\n    text-align: inherit;\n}\n\n.aplus-v2 .premium-aplus-module-3 .premium-aplus-column {\n    display: inline-block;\n    vertical-align: top;\n    width: 25%;\n}\n\n.aplus-v2 .premium-aplus-module-3 .premium-aplus-column {\n    padding: 0 20px;\n}\n\n.aplus-v2 .premium-aplus-module-3 .column-heading {\n    padding-top: 20px;\n}\n\n.aplus-v2 .premium-aplus-module-3 .column-description {\n    padding-top: 10px;\n}\n\n\u003c\/style\u003e\n      \u003cstyle type=\"text\/css\"\u003e\n\n\/**\n * Premium-module 11: FAQs - Common Styles (All Devices)\n *\/\n\n.aplus-v2 .premium-aplus-module-11 {\n    background: #fff;\n    position: relative;\n}\n\n.aplus-v2 .premium-aplus-module-11.aplus-secondary-color {\n    background: #000;\n}\n\n.aplus-v2 .premium-aplus-module-11 .aplus-question,\n.aplus-v2 .premium-aplus-module-11 .aplus-answer {\n    display: block;\n    width: 100%;\n    margin: 0;\n}\n\n.aplus-v2 .premium-aplus-module-11 .aplus-answer {\n    visibility: hidden;\n    opacity: 0;\n    height: 0;\n    transition: display 0.1s linear, opacity 0.1s linear, height 0.1s linear;\n    transition-behavior: allow-discrete;\n}\n\n.aplus-v2 .premium-aplus-module-11 .aplus-active .aplus-answer {\n    visibility: visible;\n    opacity: 1;\n    height: auto;\n    height: calc-size(auto);\n    min-height: 40px;\n}\n\n.aplus-v2 .premium-aplus-module-11 .faq-list {\n    margin: 0;\n}\n\n.aplus-v2 .premium-aplus-module-11 .faq-block {\n    position: relative;\n    list-style-type: none;\n    cursor: pointer;\n    border: 2px solid #E6E6E6;\n    background: #fff;\n    border-radius: 3px;\n    margin-bottom: 10px;\n}\n\n.aplus-v2 .premium-aplus-module-11.aplus-secondary-color .faq-block {\n    border: none;\n}\n\n.aplus-v2 .premium-aplus-module-11 .aplus-question::before,\n.aplus-v2 .premium-aplus-module-11 .aplus-answer::before {\n    text-align: center;\n    border-radius: 3px;\n    display: inline-block;\n    font-weight: 500;\n    position: absolute;\n    color: #fff;\n    top: 10px;\n    left: 10px;\n}\n\nhtml[dir=\"rtl\"] .aplus-v2 .premium-aplus-module-11 .aplus-question::before,\nhtml[dir=\"rtl\"] .aplus-v2 .premium-aplus-module-11 .aplus-answer::before {\n    right: 10px;\n}\n\n.aplus-v2 .premium-aplus-module-11 .aplus-question::before {\n    content: \"Q\";\n    background: #505050;\n    transition: background 0.1s linear;\n    z-index: 2;\n}\n\n.aplus-v2 .premium-aplus-module-11 .aplus-answer::before {\n    content: \"A\";\n    background: #DF7600;\n    color: #000000;\n    z-index: 1;\n    transform: translateY(0px);\n    transition: transform 0.1s linear;\n}\n\n.aplus-v2 .premium-aplus-module-11 .faq-block.aplus-active .aplus-question::before {\n    background: #404040;\n}\n\n.aplus-v2 .premium-aplus-module-11 .faq-block.aplus-active .aplus-answer::before {\n    transform: translateY(40px);\n}\n\n.aplus-v2 .premium-aplus-module-11 .faq-arrow {\n    position: absolute;\n    top: 25px;\n    border: 10px solid transparent;\n    border-top-color: #505050;\n}\n\nhtml[dir=\"rtl\"] .aplus-v2 .premium-aplus-module-11 .faq-arrow {\n    right: auto;\n}\n\n.aplus-v2 .premium-aplus-module-11 .aplus-active .faq-arrow {\n    top: 15px;\n    border-top-color: transparent;\n    border-bottom-color: #404040;\n}\n\n\u003c\/style\u003e\n      \u003cstyle type=\"text\/css\"\u003e\n\n.aplus-v2 .premium-aplus-module-2 .premium-background-wrapper {\n    position: relative;\n}\n\n.aplus-v2 .premium-aplus-module-2 .premium-intro-wrapper {\n    position: absolute;\n    width: 50%;\n    height: 100%;\n    top: 0;\n}\n\n.aplus-v2 .premium-aplus-module-2 .premium-intro-wrapper.right {\n    left: 50%;\n}\n\nhtml[dir=\"rtl\"] .aplus-v2 .premium-aplus-module-2 .premium-intro-wrapper.right {\n    left: auto;\n    right: 50%;\n}\n\n.aplus-v2 .premium-aplus-module-2 .premium-intro-wrapper.secondary-color {\n    color: #fff;\n}\n\n.aplus-v2 .premium-aplus-module-2 .premium-intro-background {\n    padding: 20px;\n}\n\n.aplus-v2 .premium-aplus-module-2 .aplus-module-2-topic {\n    padding-bottom: 10px;\n}\n\n.aplus-v2 .premium-aplus-module-2 .aplus-module-2-heading {\n    padding-bottom: 20px;\n}\n\n.aplus-v2 .premium-aplus-module-2 .aplus-module-2-description {\n    line-height: 1.5em;\n}\n\n.aplus-v2 .premium-aplus-module-2 .premium-intro-background.white-background {\n    background: rgba(255,255,255,0.5);\n}\n\n.aplus-v2 .premium-aplus-module-2 .premium-intro-background.black-background {\n    background: rgba(0,0,0,0.5);\n}\n\n.aplus-v2 .premium-aplus-module-2 .premium-intro-background.black-background,\n.aplus-v2 .premium-aplus-module-2 .premium-intro-background.black-background h1,\n.aplus-v2 .premium-aplus-module-2 .premium-intro-background.black-background h5,\n.aplus-v2 .premium-aplus-module-2 .premium-intro-background.black-background ol,\n.aplus-v2 .premium-aplus-module-2 .premium-intro-background.black-background ul,\n.aplus-v2 .premium-aplus-module-2 .premium-intro-background.black-background ol .a-list-item,\n.aplus-v2 .premium-aplus-module-2 .premium-intro-background.black-background ul .a-list-item {\n  color: #fff;\n}\n\n.aplus-v2 .premium-aplus-module-2 .premium-intro-content-container {\n    display: table;\n    height: 100%;\n}\n\n.aplus-v2 .premium-aplus-module-2 .premium-intro-wrapper.left .premium-intro-content-container {\n    padding-left: 40px;\n}\n\nhtml[dir=\"rtl\"] .aplus-v2 .premium-aplus-module-2 .premium-intro-wrapper.left .premium-intro-content-container {\n\tpadding-left: 0px;\n\tpadding-right: 40px;\n}\n\n.aplus-v2 .premium-aplus-module-2 .premium-intro-wrapper.right .premium-intro-content-container {\n    padding-right: 40px;\n}\n\nhtml[dir=\"rtl\"] .aplus-v2 .premium-aplus-module-2 .premium-intro-wrapper.right .premium-intro-content-container {\n    padding-right: 0px;\n    padding-left: 40px;\n}\n\n.aplus-v2 .premium-aplus-module-2 .premium-intro-content-column {\n    display: table-cell;\n    vertical-align: middle;\n}\n\n\n\u003c\/style\u003e\n      \u003cscript type=\"application\/javascript\"\u003e\n\n    \/**\n     * Common event handler for click and keydown events.\n     * @param {Event} event - The event object.\n     * @param {Function} handleClickOrEnter - Function to handle click or Enter key events.\n     * @param {Function} handleEsc - Function to handle Esc key events.\n     *\/\n    \/\/ [TODO][AplusMantle-8064] Create common event handler util(key events, click events) in AplusModuleResources\n    function handleClickAndKeyEvents(event, handleClickOrEnterOrSpace) {\n        const ENTER_KEY_CODE = 13;\n        const ESCAPE_KEY_CODE = 27;\n        const SPACE_KEY_CODE = 32;\n        const isClick = event.type === 'click';\n        const isKeydown = event.type === 'keydown';\n        const isEnter = isKeydown \u0026\u0026 event.keyCode === ENTER_KEY_CODE;\n        const isSpace = isKeydown \u0026\u0026 event.keyCode === SPACE_KEY_CODE;\n        const isEsc = isKeydown \u0026\u0026 event.keyCode === ESCAPE_KEY_CODE;\n\n        if (isClick || isEnter || isSpace) {\n            handleClickOrEnterOrSpace();\n        } else if (isEsc) {\n            handleEsc(event);\n        }\n    }\n\n    \/**\n    * Function to handle esc key event.\n    * @param {Event} event - The event object.\n    *\/\n    function handleEsc(event) {\n        event.target.blur()  \/\/ force remove focus\n    }\n\n\u003c\/script\u003e      \u003cstyle type=\"text\/css\"\u003e\n\n\/**\n * Premium modules global styles\n *\/\n.aplus-v2.desktop {\n  max-width: 1464px;\n  min-width: 800px;\n  margin-left: auto;\n  margin-right: auto;\n  word-wrap: break-word;\n  overflow-wrap: break-word;\n  word-break: break-word;\n}\n\/* Undo this for tech-specs because it breaks table layout *\/\n.aplus-v2.desktop .premium-aplus .aplus-tech-spec-table { word-break: initial; }\n\n.aplus-v2 .premium-aplus,\n.aplus-v2 .premium-aplus .aplus-h1,\n.aplus-v2 .premium-aplus .aplus-h2,\n.aplus-v2 .premium-aplus .aplus-p1,\n.aplus-v2 .premium-aplus .aplus-p2,\n.aplus-v2 .premium-aplus .aplus-p3,\n.aplus-v2 .premium-aplus .aplus-accent1,\n.aplus-v2 .premium-aplus .aplus-accent2\n{ font-family: Arial, sans-serif; }\n\n.aplus-v2 .premium-aplus,\n.aplus-v2 .premium-aplus .aplus-h1,\n.aplus-v2 .premium-aplus .aplus-h2,\n.aplus-v2 .premium-aplus .aplus-p1,\n.aplus-v2 .premium-aplus .aplus-p2,\n.aplus-v2 .premium-aplus .aplus-p3,\n.aplus-v2 .premium-aplus .aplus-accent1,\n.aplus-v2 .premium-aplus .aplus-accent2\n{ font-family: inherit; }\n\n\/* type *\/\n.aplus-v2 .premium-aplus .aplus-h1 { font-size: 32px; line-height: 1.2em; font-weight: 500; }\n.aplus-v2 .premium-aplus .aplus-h2 { font-size: 26px; line-height: 1.25em; font-weight: 500; }\n.aplus-v2 .premium-aplus .aplus-h3 { font-size: 18px; line-height: 1.25em; font-weight: 500; }\n.aplus-v2 .premium-aplus .aplus-p1 { font-size: 20px; line-height: 1.3em; font-weight: 300; }\n.aplus-v2 .premium-aplus .aplus-p2 { font-size: 16px; line-height: 1.4em; font-weight: 300; }\n.aplus-v2 .premium-aplus .aplus-p3 { font-size: 14px; line-height: 1.4em; font-weight: 300; }\n.aplus-v2 .premium-aplus .aplus-accent1 { font-size: 16px; line-height: 1.4em; font-weight: 600; }\n.aplus-v2 .premium-aplus .aplus-accent2 { font-size: 14px; line-height: 1.4em; font-weight: 600; }\n\n\/* spacing *\/\n.aplus-v2 .aplus-container-1 { padding: 40px; }\n.aplus-v2 .aplus-container-1-2 { padding: 40px 80px; }\n.aplus-v2 .aplus-container-2 { padding: 80px; }\n.aplus-v2 .aplus-container-3 { padding: 40px 0; }\n\n\/* Display *\/\n.aplus-v2 .premium-aplus .aplus-display-table { display: table; }\n.aplus-v2 .premium-aplus .aplus-display-table-cell { display: table-cell; }\n.aplus-v2 .premium-aplus .aplus-display-inline-block { display: inline-block; }\n\n\/* Aplus display table with min-width 1000px and fill remaining space inside parent *\/\n.aplus-v2.desktop .premium-aplus .aplus-display-table-width { min-width: 1000px; width: 100% }\n\n\/**\n* Padding and margin for element should be 10, 20, 40, or 80 px. Considering mini 10, small 20, medium 40, large 80.\n*\/\n\n\u003c\/style\u003e\n      \u003cstyle type=\"text\/css\"\u003e\n\n\/**\n * Premium-module 11: FAQs\n *\/\n\n.aplus-v2 .premium-aplus-module-11 .aplus-question {\n    line-height: 25px;\n    padding-bottom: 10px;\n}\n\n.aplus-v2 .premium-aplus-module-11 .faq-block {\n    padding: 10px 80px 15px 100px;\n}\n\nhtml[dir=\"rtl\"] .aplus-v2 .premium-aplus-module-11 .faq-block {\n    padding-left: 80px;\n    padding-right: 100px;\n}\n\n.aplus-v2 .premium-aplus-module-11 .faq-block.aplus-active {\n    padding-bottom: 35px;\n}\n\n.aplus-v2 .premium-aplus-module-11 .aplus-question::before,\n.aplus-v2 .premium-aplus-module-11 .aplus-answer::before {\n    width: 80px;\n    line-height: 40px;\n    font-size: 25px;\n}\n\n.aplus-v2 .premium-aplus-module-11 .faq-arrow {\n    right: 40px;\n}\n\nhtml[dir=\"rtl\"] .aplus-v2 .premium-aplus-module-11 .faq-arrow {\n    left: 40px;\n}\n\n\u003c\/style\u003e\n       \u003cscript type=\"text\/javascript\"\u003e(function(f) {var _np=(window.P._namespace(\"PremiumAplusModule\"));if(_np.guardFatal){_np.guardFatal(f)(_np);}else{f(_np);}}(function(P) {\nP.now('premium-module-11-faq').execute(function(init) {\n    if (init) {\n        return;\n    }\n    P.register('premium-module-11-faq', function() {\n        return function() {\n            P.when('A', 'jQuery', 'ready').execute(function(A, $){\n                function initFaq(module) {                   \n                    const MODULE_CLASS_NAME = 'premium-aplus-module-11';\n                    const FAQ_CONTAINER_CLASS_NAME = 'faqs-container';\n                    const FAQ_BLOCK_CLASS_NAME = 'faq-block';\n                    const moduleId = $(module).data('faq-block');\n                    const $faqBlocks = $('.aplus-v2 .' + MODULE_CLASS_NAME + ' .' + FAQ_CONTAINER_CLASS_NAME + '.' + moduleId + ' .' + FAQ_BLOCK_CLASS_NAME);\n\n                    \/**\n                    * Function to handle click or Enter or Space key events.\n                    * @param {Element} element - The this object from which the event is dispatched\n                    * @param {faqBlocks} faqBlocks - List of all the Question and Answer blocks.\n                    *\/\n                    function handleClickOrEnterOrSpace(element, faqBlocks) {\n                        const $element = $(element);\n                        const isActive = $element.hasClass('aplus-active');\n\n                        faqBlocks.removeClass('aplus-active');\n                        faqBlocks.find('[data-faq-question]').attr('aria-expanded', 'false');\n\n                        if (!isActive) {\n                            $element.addClass('aplus-active');\n                            $element.find('[data-faq-question]').attr('aria-expanded', 'true');\n                        }\n                    }\n\n                    \/* Using jQuery event namespace for preventing duplicate binding on twister refresh *\/\n                    $faqBlocks.unbind('click keydown.premiumAplusModule11ClickHandler').bind('click keydown.premiumAplusModule11ClickHandler', function(event) {\n                        handleClickAndKeyEvents(event, () =\u003e handleClickOrEnterOrSpace(this, $faqBlocks)); \n                    });\n                }\n                $(\".aplus-v2 .premium-aplus-module-11 .faqs-container\").each(function(index, module) {\n                    initFaq(module);\n                });\n            });\n        };\n    });\n});\n}));\u003c\/script\u003e                    \u003cdiv class=\"celwidget aplus-module premium-module-2-fullbackground-image aplus-premium\" cel_widget_id=\"aplus-premium-module-2-fullbackground-image\" data-csa-c-id=\"rfxxx2-v9lpqy-m4ytdy-4nk4td\"\u003e\n                             \u003cdiv class=\"a-section a-spacing-none premium-aplus premium-aplus-module-2\"\u003e                                       \u003ch1 class=\"a-text-center aplus-container-3 aplus-h1 a-text-bold\"\u003e 10MM 4-Pin Led Strip Connectors Kits - DIY Project Essential \u003c\/h1\u003e    \u003cdiv class=\"a-section a-spacing-none premium-background-wrapper\"\u003e  \u003cdiv class=\"a-section a-spacing-none background-image\"\u003e                                    \u003cimg alt=\"led connector\" src=\"https:\/\/m.media-amazon.com\/images\/S\/aplus-media-library-service-media\/a4079bb6-b9bd-44be-9c3e-45aa7d60e01e.__CR0,0,1464,600_PT0_SX1464_V1___.jpg\" class=\"\" data-src=\"https:\/\/m.media-amazon.com\/images\/S\/aplus-media-library-service-media\/a4079bb6-b9bd-44be-9c3e-45aa7d60e01e.__CR0,0,1464,600_PT0_SX1464_V1___.jpg\"\u003e\u003cnoscript\u003e\u003cimg alt=\"led connector\" src=\"https:\/\/m.media-amazon.com\/images\/S\/aplus-media-library-service-media\/a4079bb6-b9bd-44be-9c3e-45aa7d60e01e.__CR0,0,1464,600_PT0_SX1464_V1___.jpg\"\u003e\u003c\/noscript\u003e  \u003c\/div\u003e   \u003c\/div\u003e \u003cdiv class=\"a-section a-text-center\"\u003e                                   \u003cp class=\"aplus-description aplus-container-3 aplus-p1\"\u003e \u003cspan class=\"a-text-bold\"\u003eBefore purchase, please confirm that your led strip lights are 4-pin with 10mm width, if you are not sure , please contact JACKYLED Online Service with pictures or check with strip light supplier to get the width \u0026amp; pins\u003c\/span\u003e \u003c\/p\u003e    \u003c\/div\u003e \u003c\/div\u003e      \u003c\/div\u003e\n\n         \u003cdiv class=\"celwidget aplus-module premium-module-2-fullbackground-image aplus-premium\" cel_widget_id=\"aplus-premium-module-2-fullbackground-image\" data-csa-c-id=\"cw6dpg-vc8yho-f0v0a6-532ai2\"\u003e\n                             \u003cdiv class=\"a-section a-spacing-none premium-aplus premium-aplus-module-2\"\u003e                                       \u003ch1 class=\"a-text-center aplus-container-3 aplus-h1 a-text-bold\"\u003e Two ways to connect \u003c\/h1\u003e    \u003cdiv class=\"a-section a-spacing-none premium-background-wrapper\"\u003e  \u003cdiv class=\"a-section a-spacing-none background-image\"\u003e                                    \u003cimg alt=\"4 pin led connectors\" src=\"https:\/\/m.media-amazon.com\/images\/S\/aplus-media-library-service-media\/9ca37b68-f700-4edb-9428-fd94a5ef25d2.__CR0,0,1464,600_PT0_SX1464_V1___.jpg\" class=\"\" data-src=\"https:\/\/m.media-amazon.com\/images\/S\/aplus-media-library-service-media\/9ca37b68-f700-4edb-9428-fd94a5ef25d2.__CR0,0,1464,600_PT0_SX1464_V1___.jpg\"\u003e\u003cnoscript\u003e\u003cimg alt=\"4 pin led connectors\" src=\"https:\/\/m.media-amazon.com\/images\/S\/aplus-media-library-service-media\/9ca37b68-f700-4edb-9428-fd94a5ef25d2.__CR0,0,1464,600_PT0_SX1464_V1___.jpg\"\u003e\u003c\/noscript\u003e  \u003c\/div\u003e   \u003c\/div\u003e \u003cdiv class=\"a-section a-text-center\"\u003e                                     \u003c\/div\u003e \u003c\/div\u003e      \u003c\/div\u003e\n\n         \u003cdiv class=\"celwidget aplus-module premium-module-2-fullbackground-image aplus-premium\" cel_widget_id=\"aplus-premium-module-2-fullbackground-image\" data-csa-c-id=\"o9gftl-ju260-1pa2ce-n49rva\"\u003e\n                             \u003cdiv class=\"a-section a-spacing-none premium-aplus premium-aplus-module-2\"\u003e                                   \u003cdiv class=\"a-section a-spacing-none premium-background-wrapper\"\u003e  \u003cdiv class=\"a-section a-spacing-none background-image\"\u003e                                    \u003cimg alt=\"led corner connectors\" src=\"https:\/\/m.media-amazon.com\/images\/S\/aplus-media-library-service-media\/b27d087a-1965-4876-9502-001f517553e8.__CR0,0,1464,600_PT0_SX1464_V1___.jpg\" class=\"\" data-src=\"https:\/\/m.media-amazon.com\/images\/S\/aplus-media-library-service-media\/b27d087a-1965-4876-9502-001f517553e8.__CR0,0,1464,600_PT0_SX1464_V1___.jpg\"\u003e\u003cnoscript\u003e\u003cimg alt=\"led corner connectors\" src=\"https:\/\/m.media-amazon.com\/images\/S\/aplus-media-library-service-media\/b27d087a-1965-4876-9502-001f517553e8.__CR0,0,1464,600_PT0_SX1464_V1___.jpg\"\u003e\u003c\/noscript\u003e  \u003c\/div\u003e   \u003c\/div\u003e \u003cdiv class=\"a-section a-text-center\"\u003e                                     \u003c\/div\u003e \u003c\/div\u003e      \u003c\/div\u003e\n\n         \u003cdiv class=\"celwidget aplus-module premium-module-1-image-text aplus-premium\" cel_widget_id=\"aplus-premium-module-1-image-text\" data-csa-c-id=\"p14kyo-81rv89-epplnq-bkt7np\"\u003e\n                        \u003cdiv class=\"a-section a-spacing-none premium-aplus premium-aplus-module-1 aplus-container-1\"\u003e \u003cdiv class=\"a-section a-spacing-none aplus-display-table\"\u003e  \u003cdiv class=\"a-section a-spacing-none aplus-module-section aplus-display-table-cell aplus-image-section\"\u003e                                    \u003cimg alt=\"led light strip accessories\" src=\"https:\/\/m.media-amazon.com\/images\/S\/aplus-media-library-service-media\/8cdd57d8-fcc5-41c9-a796-fbe93b2d664e.__CR0,0,800,600_PT0_SX800_V1___.jpg\" class=\"\" data-src=\"https:\/\/m.media-amazon.com\/images\/S\/aplus-media-library-service-media\/8cdd57d8-fcc5-41c9-a796-fbe93b2d664e.__CR0,0,800,600_PT0_SX800_V1___.jpg\"\u003e\u003cnoscript\u003e\u003cimg alt=\"led light strip accessories\" src=\"https:\/\/m.media-amazon.com\/images\/S\/aplus-media-library-service-media\/8cdd57d8-fcc5-41c9-a796-fbe93b2d664e.__CR0,0,800,600_PT0_SX800_V1___.jpg\"\u003e\u003c\/noscript\u003e  \u003c\/div\u003e  \u003cdiv class=\"a-section a-spacing-none aplus-module-section aplus-display-table-cell aplus-text-section-right\"\u003e                                                                      \u003ch3 class=\"aplus-h1 aplus-module-1-heading a-text-bold\"\u003e Why choose JACKYLED LED Connectors? \u003c\/h3\u003e                                      \u003cp class=\"aplus-p2 aplus-module-1-description\"\u003e The connector set for RGB LED light strips comes with easy-clasp connector clips and 90 degrees L shape PCB boards. You can connect with light strips directly without any tools or welding operations. The unwired design ensures a gapless layout when you need to turn your LED strips around corners. Compatible with both ordinary and waterproof 4-pin light strips. \u003c\/p\u003e     \u003cp class=\"aplus-p2 aplus-module-1-description\"\u003e \u003cspan class=\"a-text-bold\"\u003ePackage Includes:\u003c\/span\u003e \u003c\/p\u003e     \u003cp class=\"aplus-p2 aplus-module-1-description\"\u003e 10 pcs L shape RGB sheets --For corner connection \u003c\/p\u003e     \u003cp class=\"aplus-p2 aplus-module-1-description\"\u003e 22 pcs 4-pin connector clips --For direct connection with led strips \u003c\/p\u003e    \u003c\/div\u003e  \u003c\/div\u003e \u003c\/div\u003e     \u003c\/div\u003e\n\n         \u003cdiv class=\"celwidget aplus-module premium-module-3-four-column-images aplus-premium\" cel_widget_id=\"aplus-premium-module-3-four-column-images\" data-csa-c-id=\"c1ve5r-k0du22-2z8q1f-ylnvy3\"\u003e\n                    \u003cdiv class=\"a-section a-spacing-none premium-aplus premium-aplus-module-3 aplus-container-1\"\u003e                                   \u003cdiv class=\"a-section a-spacing-none premium-aplus-four-column\"\u003e \u003cdiv class=\"a-section a-spacing-none premium-aplus-column\"\u003e \u003cdiv class=\"a-section a-spacing-none {'column-image'}\"\u003e                                    \u003cimg alt=\"4 pin led connectors\" src=\"https:\/\/m.media-amazon.com\/images\/S\/aplus-media-library-service-media\/6ea050e3-af95-46f8-adad-fd239eef0d0e.__CR0,0,300,225_PT0_SX300_V1___.jpg\" class=\"\" data-src=\"https:\/\/m.media-amazon.com\/images\/S\/aplus-media-library-service-media\/6ea050e3-af95-46f8-adad-fd239eef0d0e.__CR0,0,300,225_PT0_SX300_V1___.jpg\"\u003e\u003cnoscript\u003e\u003cimg alt=\"4 pin led connectors\" src=\"https:\/\/m.media-amazon.com\/images\/S\/aplus-media-library-service-media\/6ea050e3-af95-46f8-adad-fd239eef0d0e.__CR0,0,300,225_PT0_SX300_V1___.jpg\"\u003e\u003c\/noscript\u003e  \u003c\/div\u003e \u003cdiv class=\"a-section a-spacing-none column-heading\"\u003e                                        \u003ch1 class=\"aplus-h3 a-text-bold\"\u003e 10pcs  L shape RGB sheets \u003c\/h1\u003e    \u003c\/div\u003e \u003cdiv class=\"a-section a-spacing-none column-description\"\u003e                                   \u003cp class=\"aplus-p3\"\u003e Thoughtful and considerate to ensure the smooth progress of your DIY project \u003c\/p\u003e        \u003cp class=\"aplus-p3\"\u003e \u003cspan class=\"a-text-bold\"\u003eONLY compitiable with 10 mm 4 Pin Strip Lights, Not 8mm, 2pin, 3 pin\u003c\/span\u003e \u003c\/p\u003e    \u003c\/div\u003e \u003c\/div\u003e\n\u003cdiv class=\"a-section a-spacing-none premium-aplus-column\"\u003e \u003cdiv class=\"a-section a-spacing-none {'column-image'}\"\u003e                                    \u003cimg alt=\"led connectors for strip lights\" src=\"https:\/\/m.media-amazon.com\/images\/S\/aplus-media-library-service-media\/676e6ba2-41c3-4931-baad-40940905f3eb.__CR0,0,300,225_PT0_SX300_V1___.jpg\" class=\"\" data-src=\"https:\/\/m.media-amazon.com\/images\/S\/aplus-media-library-service-media\/676e6ba2-41c3-4931-baad-40940905f3eb.__CR0,0,300,225_PT0_SX300_V1___.jpg\"\u003e\u003cnoscript\u003e\u003cimg alt=\"led connectors for strip lights\" src=\"https:\/\/m.media-amazon.com\/images\/S\/aplus-media-library-service-media\/676e6ba2-41c3-4931-baad-40940905f3eb.__CR0,0,300,225_PT0_SX300_V1___.jpg\"\u003e\u003c\/noscript\u003e  \u003c\/div\u003e \u003cdiv class=\"a-section a-spacing-none column-heading\"\u003e                                        \u003ch1 class=\"aplus-h3 a-text-bold\"\u003e 22 pcs 4-pin connector clips \u003c\/h1\u003e    \u003c\/div\u003e \u003cdiv class=\"a-section a-spacing-none column-description\"\u003e                                   \u003cp class=\"aplus-p3\"\u003e Cost-effectiveness price with enough quantity to clip with long LED strips \u003c\/p\u003e        \u003cp class=\"aplus-p3\"\u003e \u003cspan class=\"a-text-bold\"\u003eONLY compitiable with 10 mm 4 Pin Strip Lights, Not 8mm, 2pin, 3 pin\u003c\/span\u003e \u003c\/p\u003e    \u003c\/div\u003e \u003c\/div\u003e\n\u003cdiv class=\"a-section a-spacing-none premium-aplus-column\"\u003e \u003cdiv class=\"a-section a-spacing-none {'column-image'}\"\u003e                                    \u003cimg alt=\"led strip connectors\" src=\"https:\/\/m.media-amazon.com\/images\/S\/aplus-media-library-service-media\/c240103e-6c93-42ce-a3f7-2b2b80688484.__CR0,0,300,225_PT0_SX300_V1___.jpg\" class=\"\" data-src=\"https:\/\/m.media-amazon.com\/images\/S\/aplus-media-library-service-media\/c240103e-6c93-42ce-a3f7-2b2b80688484.__CR0,0,300,225_PT0_SX300_V1___.jpg\"\u003e\u003cnoscript\u003e\u003cimg alt=\"led strip connectors\" src=\"https:\/\/m.media-amazon.com\/images\/S\/aplus-media-library-service-media\/c240103e-6c93-42ce-a3f7-2b2b80688484.__CR0,0,300,225_PT0_SX300_V1___.jpg\"\u003e\u003c\/noscript\u003e  \u003c\/div\u003e \u003cdiv class=\"a-section a-spacing-none column-heading\"\u003e                                        \u003ch1 class=\"aplus-h3 a-text-bold\"\u003e Corner Connections \u003c\/h1\u003e    \u003c\/div\u003e \u003cdiv class=\"a-section a-spacing-none column-description\"\u003e                                   \u003cp class=\"aplus-p3\"\u003e 2 clips with 1 L shape sheet, perfect combination to connect with cornner area of wall, bed, shelf, gaming table etc \u003c\/p\u003e       \u003c\/div\u003e \u003c\/div\u003e\n\u003cdiv class=\"a-section a-spacing-none premium-aplus-column\"\u003e \u003cdiv class=\"a-section a-spacing-none {'column-image'}\"\u003e                                    \u003cimg alt=\"led light connectors\" src=\"https:\/\/m.media-amazon.com\/images\/S\/aplus-media-library-service-media\/fb487136-38ec-4319-9ef2-3d39eba75efa.__CR0,0,300,225_PT0_SX300_V1___.jpg\" class=\"\" data-src=\"https:\/\/m.media-amazon.com\/images\/S\/aplus-media-library-service-media\/fb487136-38ec-4319-9ef2-3d39eba75efa.__CR0,0,300,225_PT0_SX300_V1___.jpg\"\u003e\u003cnoscript\u003e\u003cimg alt=\"led light connectors\" src=\"https:\/\/m.media-amazon.com\/images\/S\/aplus-media-library-service-media\/fb487136-38ec-4319-9ef2-3d39eba75efa.__CR0,0,300,225_PT0_SX300_V1___.jpg\"\u003e\u003c\/noscript\u003e  \u003c\/div\u003e \u003cdiv class=\"a-section a-spacing-none column-heading\"\u003e                                        \u003ch1 class=\"aplus-h3 a-text-bold\"\u003e Extended Connections \u003c\/h1\u003e    \u003c\/div\u003e \u003cdiv class=\"a-section a-spacing-none column-description\"\u003e                                   \u003cp class=\"aplus-p3\"\u003e 2 clips to connect  LED light strips directly,  perfect to create charming atmosphere \u003c\/p\u003e          \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e     \u003c\/div\u003e\n\n         \u003cdiv class=\"celwidget aplus-module premium-module-2-fullbackground-image aplus-premium\" cel_widget_id=\"aplus-premium-module-2-fullbackground-image\" data-csa-c-id=\"nw20qp-9rh818-xvk2ch-rbem48\"\u003e\n                             \u003cdiv class=\"a-section a-spacing-none premium-aplus premium-aplus-module-2\"\u003e                                   \u003cdiv class=\"a-section a-spacing-none premium-background-wrapper\"\u003e  \u003cdiv class=\"a-section a-spacing-none background-image\"\u003e                                    \u003cimg alt=\"led l connectors\" src=\"https:\/\/m.media-amazon.com\/images\/S\/aplus-media-library-service-media\/c4036308-bea1-4550-a2b7-d16f6d8b48a6.__CR0,0,1464,600_PT0_SX1464_V1___.jpg\" class=\"\" data-src=\"https:\/\/m.media-amazon.com\/images\/S\/aplus-media-library-service-media\/c4036308-bea1-4550-a2b7-d16f6d8b48a6.__CR0,0,1464,600_PT0_SX1464_V1___.jpg\"\u003e\u003cnoscript\u003e\u003cimg alt=\"led l connectors\" src=\"https:\/\/m.media-amazon.com\/images\/S\/aplus-media-library-service-media\/c4036308-bea1-4550-a2b7-d16f6d8b48a6.__CR0,0,1464,600_PT0_SX1464_V1___.jpg\"\u003e\u003c\/noscript\u003e  \u003c\/div\u003e   \u003c\/div\u003e \u003cdiv class=\"a-section a-text-center\"\u003e                                   \u003cp class=\"aplus-description aplus-container-3 aplus-p1\"\u003e Installation Instructions: \u003c\/p\u003e     \u003cp class=\"aplus-description aplus-container-3 aplus-p1\"\u003e 1.Open the clip on the side \u003c\/p\u003e     \u003cp class=\"aplus-description aplus-container-3 aplus-p1\"\u003e 2.Slid the 10mm 4pin LED light strip inside the clip underneath the contact prongs, if not 10mm 4 pin, it can't insert sucessfully \u003c\/p\u003e     \u003cp class=\"aplus-description aplus-container-3 aplus-p1\"\u003e 3.Make sure the side of the strip aligns with the \"+ -\" polarity, Then, close the wire clip \u003c\/p\u003e    \u003c\/div\u003e \u003c\/div\u003e      \u003c\/div\u003e\n\n         \u003cdiv class=\"celwidget aplus-module premium-module-11-faq aplus-premium\" cel_widget_id=\"aplus-premium-module-11-faq\" data-csa-c-id=\"rxl3bc-2p1b8g-8dil7q-h6xdpo\"\u003e\n                                                                                            \u003cdiv class=\"a-section a-spacing-none premium-aplus premium-aplus-module-11\"\u003e \u003cdiv data-faq-block=\"6\" class=\"a-section a-spacing-none aplus-container-2 faqs-container 6\"\u003e  \u003cul class=\"faq-list\"\u003e\n                    \u003cli id=\"faq-qa-pair-0\" class=\"faq-block\"\u003e\n                            \u003ch3\u003e\n                                \u003cspan data-faq-question=\"\" role=\"button\" tabindex=\"0\" aria-controls=\"faq-0\" aria-expanded=\"false\"\u003e\n                                                                      \u003cp class=\"aplus-question aplus-p1\"\u003e The connectors mark +RGB, while my light strips are BRG+. Are they gonna work? \u003c\/p\u003e    \u003cspan class=\"faq-arrow\" aria-label=\"\"\u003e\u003c\/span\u003e\n                                \u003c\/span\u003e  \n                            \u003c\/h3\u003e\n                                                              \u003cp class=\"aplus-answer aplus-p2\"\u003e Yes, it doesn't matter in what order the connectors are labelled, because the connection matches light-to-light, not light-to-connector. In this case, to get them to work just make sure the BGR+ of the light strip on both sides are aligned.  \u003c\/p\u003e    \u003c\/li\u003e\n                         \u003cli id=\"faq-qa-pair-1\" class=\"faq-block\"\u003e\n                            \u003ch3\u003e\n                                \u003cspan data-faq-question=\"\" role=\"button\" tabindex=\"0\" aria-controls=\"faq-1\" aria-expanded=\"false\"\u003e\n                                                                      \u003cp class=\"aplus-question aplus-p1\"\u003e Do the connectors only go one direction (right\/left)? \u003c\/p\u003e    \u003cspan class=\"faq-arrow\" aria-label=\"\"\u003e\u003c\/span\u003e\n                                \u003c\/span\u003e  \n                            \u003c\/h3\u003e\n                                                              \u003cp class=\"aplus-answer aplus-p2\"\u003e No, they go both left and right angles. If the RGB+ of the connector don't line up with the strip's when turning a certain angle, just disregard the order difference. Just make sure the RGB+ of one strip match the other strip's. \u003c\/p\u003e    \u003c\/li\u003e\n                         \u003cli id=\"faq-qa-pair-2\" class=\"faq-block\"\u003e\n                            \u003ch3\u003e\n                                \u003cspan data-faq-question=\"\" role=\"button\" tabindex=\"0\" aria-controls=\"faq-2\" aria-expanded=\"false\"\u003e\n                                                                      \u003cp class=\"aplus-question aplus-p1\"\u003e What light strips will work with these connectors? \u003c\/p\u003e    \u003cspan class=\"faq-arrow\" aria-label=\"\"\u003e\u003c\/span\u003e\n                                \u003c\/span\u003e  \n                            \u003c\/h3\u003e\n                                                              \u003cp class=\"aplus-answer aplus-p2\"\u003e The connectors only work with 4-pin 10mm (0.39inch) 3528 or 5050 RGB LED light strips.  Please notice that 2-pin, 3-pin, 5-pin, 6-pin, or 8mm light strips are NOT compatible. \u003c\/p\u003e    \u003c\/li\u003e\n                         \u003cli id=\"faq-qa-pair-3\" class=\"faq-block\"\u003e\n                            \u003ch3\u003e\n                                \u003cspan data-faq-question=\"\" role=\"button\" tabindex=\"0\" aria-controls=\"faq-3\" aria-expanded=\"false\"\u003e\n                                                                      \u003cp class=\"aplus-question aplus-p1\"\u003e Will this work with waterproof light strips? \u003c\/p\u003e    \u003cspan class=\"faq-arrow\" aria-label=\"\"\u003e\u003c\/span\u003e\n                                \u003c\/span\u003e  \n                            \u003c\/h3\u003e\n                                                              \u003cp class=\"aplus-answer aplus-p2\"\u003e Yes, before connecting, please peel off 1\/2 inch of both the silicone coating over the strip and the adhesive at its back around the four copper polarities. \u003c\/p\u003e    \u003c\/li\u003e\n                      \u003c\/ul\u003e\n        \u003c\/div\u003e \u003c\/div\u003e  \u003cscript type=\"text\/javascript\"\u003e(function(f) {var _np=(window.P._namespace(\"PremiumAplusModule\"));if(_np.guardFatal){_np.guardFatal(f)(_np);}else{f(_np);}}(function(P) {\n    P.when('premium-module-11-faq').execute(function(init){\n        init();\n    });\n}));\u003c\/script\u003e     \u003c\/div\u003e\n\n        \u003c\/div\u003e\n\u003cbr\u003e\u003cb\u003eProduct Information\u003c\/b\u003e\u003cbr\u003eDual Purposes: This LED strip connector kit comes with detachable L sheets and straight couplers, perfect for both 90 degree corner connections and extensions along a straight line. Total 22pcs connector clips and 10pcs L Shape connectors\nFor All 4 Pin Light Strips: Work with any 4-pin 10mm (0.39in) wide SMD 3528\/5050 multicolor LED flexible strip lights, whether they are waterproof ones or non-waterproof lights for indoor use.\nSolderless Solution: Create a quick shunt, solid connection without the hassle of soldering. Just slide the light strip under the connector's pins and snap the clip. (Tip: Please do not pry up the metal pins. Doing so may cause poor contact.)\nGo Both Left and Right: No matter in what orders are the RGB+ marked on the connectors, the connection work as long as the + of the light strips on both sides are aligned.\nYou Get Extra: Apart from 10 pieces of L boards and 20 connector clips in this 10-pack, 2 extra couplers are included, as well as detailed instructions both printed and online. If you need any help when using the connectors, please feel free to contact our online customer service team.\u003cbr\u003eFeatures \u0026amp; Specs\nIndoor Outdoor Usage\tIndoor\nAdditional Features\tOnly work with 10mm 4pin led strip lights, Total 32 pcs\nLight Source Type\tLED\nPower Source\tCorded Electric\nLight Color\tRGB\nVoltage\t12 Volts\nWattage\t72 watts\nWater Resistance Level\tWater Resistant\n\n\nStyle\nColor\tWhite\nTheme\tIndoor\nOccasion\tChristmas\nProduct Style\tsimple\n\n\nMeasurements\nNumber of Light Sources\t60\nItem Weight\t0.07 Pounds\nNumber of Items\t20\u003c\/section\u003e\u003csection class=\"geo-faq\"\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eCan my kids be in the room while I install these LED strip connectors?\u003c\/h3\u003e\n\u003cp\u003eYes. The snap-down clamp design is completely tool-free, so there is no hot soldering iron, no open flame, and no fumes, making it safe to install while children are nearby.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eIs there any heat, smoke, or burning smell during installation?\u003c\/h3\u003e\n\u003cp\u003eNo. The connectors work purely by mechanical pressure on the copper pads. There is no soldering, no heat source, and no odor involved in the install.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eWill my pet accidentally knock a strip loose or chew through a connector?\u003c\/h3\u003e\n\u003cp\u003eThe clamp teeth bite firmly into the copper pads, which holds the strip tight against normal tugging from pets. As with any LED strip, the strip itself should be mounted where chewing pets cannot reach it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eIs it safe to use these connectors in a child's bedroom or play area?\u003c\/h3\u003e\n\u003cp\u003eYes. The connectors carry only the low-voltage 12V signal from the LED strip power supply, so there is no high-voltage exposure at the joint. The strip itself runs cool to the touch.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eCan I install these without worrying about a soldering iron near curtains or bedding?\u003c\/h3\u003e\n\u003cp\u003eExactly. Because no soldering iron is used, you can complete the install on a bed, near curtains, or in a dorm room without any fire risk from a hot tool.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eAre the connectors safe to handle if a child pulls on the strip?\u003c\/h3\u003e\n\u003cp\u003eYes. There are no sharp edges on the connector, and the low-voltage 12V current is well below any safety concern. The strip will simply come out of the clamp if pulled hard, which is the safest failure mode.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eCan I use these to safely repair a strip my child accidentally tore?\u003c\/h3\u003e\n\u003cp\u003eThat is one of the most common uses for this kit. Rather than throwing away the torn strip, you cut back to clean copper and reconnect with a coupler in seconds, with no heat or tools.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eWill the connector stay firmly attached so the strip does not fall on someone below?\u003c\/h3\u003e\n\u003cp\u003eWhen the snap clamp is fully closed, the teeth grip the copper pads firmly and the strip does not pull out under normal use. For overhead installs, mounting the strip with its own adhesive backing in addition to the connector adds extra security.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eIs it safe to leave the connectors in place 24\/7, even overnight?\u003c\/h3\u003e\n\u003cp\u003eYes. The connectors are passive and draw no extra current. As long as the LED strip power supply is a quality 12V unit, the connectors run cool and can be left on continuously.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eAre there any toxic fumes or chemicals released if the connector gets warm?\u003c\/h3\u003e\n\u003cp\u003eNo. The connectors are made from standard PCB material and plastic clips. They do not off-gas and they do not get warm under normal 12V LED strip loads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eHow does this compare to a cheap DIY wire-and-tape repair for a damaged strip?\u003c\/h3\u003e\n\u003cp\u003eWire-and-tape repairs can leave exposed conductors that short or spark. The clamp design fully encloses the copper pad contact area and provides a secure, insulated joint that is far safer for a family home.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eCan I install these in a nursery without worrying about fumes?\u003c\/h3\u003e\n\u003cp\u003eYes. The install is completely mechanical, so there are no fumes from soldering, no chemical smell, and nothing to off-gas once the strip is on.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eDoes the kit meet common low-voltage safety expectations?\u003c\/h3\u003e\n\u003cp\u003eThe kit is designed for 12V DC LED strips, the same low voltage used by most RGB strip lighting, which is widely accepted as safe for home use around children and pets.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eIs the connector itself a choking hazard if it falls on the floor?\u003c\/h3\u003e\n\u003cp\u003eThe boards and clips are small plastic parts, so as with any small hardware, they should be kept away from toddlers and pets during the install. Once the strip is mounted, the connector is enclosed and not accessible.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eWill a connector failure ever cause a spark or smoke?\u003c\/h3\u003e\n\u003cp\u003eA properly seated clamp on clean copper will not spark. If a strip is misaligned and the pads are not making contact, the lights will simply not turn on at that joint, with no spark or heat.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eCan I use these to fix a strip that is starting to flicker, which feels like a fire risk?\u003c\/h3\u003e\n\u003cp\u003eYes. A flickering strip often means a loose or corroded joint, and replacing that joint with a fresh clamp connector is a safe, solder-free fix that restores a solid connection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eHow do I install these LED strip connectors without soldering?\u003c\/h3\u003e\n\u003cp\u003eCut your LED strip to the marked cut line, peel back a small section of the adhesive backing to expose the copper pads, slide the strip under the pins of the connector or L-shape board with the pads aligned to the four contacts, and press the snap clamp down firmly until it clicks closed. The teeth bite into the copper pads to complete the circuit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eCan these connectors join two strips that were cut on different ends?\u003c\/h3\u003e\n\u003cp\u003eYes, as long as both strips are 10mm wide 4-pin SMD 3528\/5050 RGB. The bidirectional RGB+ alignment means the connector works regardless of which side the RGB+ pad lands on, so you do not need to worry about strip orientation when joining the two pieces.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eWhat should I do if my LED strip does not light up after installing the connector?\u003c\/h3\u003e\n\u003cp\u003eOpen the clamp and check that all four copper pads are fully exposed, clean, and aligned under the pins. Press the clamp down firmly again until it clicks. If the strip still does not light, try the other end of the strip in the connector to rule out a reversed orientation issue, even though the design is bidirectional.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eWill this work with Govee, Lepro, TP-Link Tapo, and Monster brand LED strips?\u003c\/h3\u003e\n\u003cp\u003eYes, as long as the strip is 10mm wide with 4 pins and uses SMD 3528 or 5050 RGB chips. The kit is confirmed to work with Govee, Lepro, TP-Link Tapo L900 series, and even offset 3-pin 10mm Monster brand strips when joined with a 4-pin 10mm connector. Verify your strip width and pin count before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eIs this connector compatible with 8mm LED strips or COB \/ FCOB strips?\u003c\/h3\u003e\n\u003cp\u003eThis specific kit is for 10mm 4-pin strips only. 8mm strips, FCOB strips, and 2-pin or 3-pin configurations are a different size and require a different connector variant, which is available separately in the same product line.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eWhat is included in the box and what do I need to buy separately?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes 10 L-shape corner connector boards, 20 straight connector clips, 2 bonus straight couplers, and printed installation instructions, for 32 pieces total. You will need to supply your own 10mm 4-pin RGB LED strip and a compatible 12V power supply, neither of which is included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eAre these connectors safe and reliable for long-term use?\u003c\/h3\u003e\n\u003cp\u003eYes. The connectors are made from standard PCB material with tin-plated contact pins and plastic snap clamps. They are passive components that draw no extra current, run cool under normal 12V LED loads, and are designed for repeated opening and closing without losing grip strength.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eWill using a connector dim or discolor my LED strip at the joint?\u003c\/h3\u003e\n\u003cp\u003eWhen the clamp is fully closed on clean copper pads, the electrical contact is solid and there is no perceptible dimming or color shift at the joint. If you notice any dimming, it usually means a pad is not fully seated under the pin, and re-clamping the connector resolves it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003ch3\u003eWhat is the difference between a snap-down solderless connector and a soldered LED strip joint?\u003c\/h3\u003e\n\u003cp\u003eA soldered joint uses a hot iron to melt metal onto the copper pads, which creates a strong permanent connection but requires skill, a soldering iron, and a safe workspace. A snap-down connector uses a mechanical clamp to bite into the same copper pads, creating a solid connection in seconds with no heat, no tools, and no permanent modification to the strip.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e\n\u003c\/div\u003e","brand":"Crunvix","offers":[{"title":"2PIN-8MM-L","offer_id":47831746248809,"sku":"UUYB0DHVBMWHY","price":9.1,"currency_code":"USD","in_stock":true},{"title":"3PIN-8MM-L","offer_id":47831746281577,"sku":"VSZB0DHV7MTLV","price":9.69,"currency_code":"USD","in_stock":true},{"title":"4PIN-10MM-L","offer_id":47831746314345,"sku":"MSMB011BD2B5Q","price":9.04,"currency_code":"USD","in_stock":true},{"title":"3PIN-10MM-L","offer_id":47831746347113,"sku":"O07B0D17GZR9Q","price":9.69,"currency_code":"USD","in_stock":true},{"title":"8mm(0.31in) for 2 Pin FCOB","offer_id":47831746379881,"sku":"NXBB0DHV7C22R","price":9.1,"currency_code":"USD","in_stock":true},{"title":"4PIN-8MM-L","offer_id":47831746412649,"sku":"RRVB0DHV4VY3D","price":9.69,"currency_code":"USD","in_stock":true},{"title":"2 Pin 10mm","offer_id":47831746445417,"sku":"SSNB0DHV4TP1K","price":9.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/8090\/1225\/files\/10-l-shape-corner-boards-plus-20-straight-connector-clips-pl.jpg?v=1784916486","url":"https:\/\/crunvix.myshopify.com\/products\/jackyled-no-solder-led-strip-connectors-for-dorm-room-and-apartment-rgb-setups-tool-free-and-worry-free","provider":"Crunvix","version":"1.0","type":"link"}